Specifications

• Line Interactive
• True Sinewave output
• 3300VA, Universal tower / 2U rack,
• 19" rails
• LCD Display
• USB + RS232 communications port + free slot for Netvision SNMP / ADC dry contact cards
• 8 x IEC outlets
• Iincludes 3 pin Aust input cord + 2 x IEC output cords
• EPO (emergency power off function)
• Local software included (Windows, Linux and Mac OS X)
• Internal batteries included
• Max 2 additional EBM (extra batteries)

UPS and internal batteries

 

NETYS PR RT + 1 (NPR-B1700-RT) + 2 (NPR-B1700-RT) 1700 VA 22 min 42 min

 

NETYS PR RT + 1 (NPR-B3300-RT) + 2 (NPR-B3300-RT) 2200 VA 37 min 72 min 3300 VA 22 min 43 min

 

 

Control panel

 

1. On / Off 2. Load present 3. Load level (5 steps) 4. General Alarm 5. Battery fault / Replace the battery 6. Overload 7. Battery capacity 8. Normal mode / Battery mode (flashing) 9. Automatic Voltage / Regulation active 10. Configuration 11. Programmable outlets 12. Input value 13. UPS test / Buzzer off 14. Navigator button 15. Enter

Technical data

 

Sn	1700 VA	2200 VA	3300 VA
Pn	1350 W	1800 W	2700 W
Input / output	1/1

Input
Rated voltage	230 V
Voltage tolerances	161 V ±4% (selecting wide mode) -276 V ±4%
Rated frequency	50 / 60 Hz with automatic selection
Mains connection	IEC320-C14 (10 A)	IEC320-C20 (16 A)

Output
Automatic Voltage Regulation (AVR)	The AVR increases (boost 1) the output voltage by 14% when the input voltage drops below 90% of the nominal value. The AVR decreases (bucks) the output voltage by 12% when the input voltage rises above 106% of the nominal value.
Rated voltage	230 V ±5%
Rated frequency	50/60 Hz ±1%
Wave form	Sine wave
Protection	Normal Mode: overload (110% for 3 minutes) Battery Mode: overload (110% for 30 seconds); shortcircuit protected
Sockets	8 (10 A) x IEC 320	8 (10 A) x IEC 320 1 (16 A) x IEC 320

Batteries
Type	Sealed lead-acid maintenance free - expected life 3/5 years
Back-up time (1)	6 min	8 min	6 min

Communication
Interface	RS232 - USB NET VISION (TCP/IP & SNMP) optional card
Local communication software	Local View
Data line protection	NTP data line suppressor: RJ45 10 Base T

UPS Cabinet
Dimensions (W x D x H) [mm]	440 x 436 x 87 mm	440 x 608 x 87 mm
Weight	18 kg	28.2 kg	31.5 kg

Standards
Safety	EN 62040-1, AS 62040-1
EMC	EN 62040-2, AS 62040-2
Product declaration	CE, C-Tick (N876)

 (1) @ 75% of load

Socomec : NETYS PR RT 3300VA Tower / Rack UPSThe NETYS PR is a Line Interactive, true Sinewave Output 3300VA Universal tower / 2U rack UPS. It is a versatile, convertible high performance UPS solution for professional and IT equipment, servers and networking devices, CAD/ Graphic workstations with monitors and peripherals and control systems Features A secure and professional supply continuityIdeal solution for protecting small servers, networking devices and peripherals.Assures service continuity to critical applications.Designed for professional applications: the sinevawe inverter technology assures full compatibility with any kind of load and power supply.Tailored to IT networking : The space and time-saving tower/rack conversion option means it can be installed easily either in tower mode or inside standard 19” rack cabinets depending on the user’s needs.Simple to install : No configuration needed on first startup.Compact footprint (2U/89 mm) for installation in rack cabinets.Attractive design for visible installation in offices.USB port and HID protocol as standard for direct interfacing with Windows systems®, without the need for additional specialist software.Protection for your data line: Integrated NTP protection for LAN/ADSL connection against the risk of data line overvoltage.Meets practical needs: Optional battery extension modules (EBM) to meet all back-up time requirements, even after installation.Clear and uncluttered LCD interface, with buzzers that immediately indicate the operating status of the UPS, even for less specialist users.Simplified maintenance and Battery `hot swap’, without closing down other applications.Easy to use and to integrate Wide range of communication protocols available in options (including JBUS, TCP/ IP and SNMP) for integration into LAN networks or building management systems (BMS) · Easy connections to the applications Wide range of communication protocols available in options (including JBUS, TCP/ IP and SNMP) for integration into LAN networks or building management systems (BMS) · Easy connections to the applications (depending on power) via 8 or 8+1 IEC 320 (IT standard) sockets. Load segmentation function to prioritize loads and manage critical situations. EPO (Emergency Power Off) emergency stop. RS232 advanced connections for the management of the power supply and local/ remote shutdown of applications.Standard and Option FeatureStandard communication features• LOCAL VIEW: ideal UPS monitoring and shutdown point-to-point solution for Windows®, Linux and Mac OS X operating systems. • HID: UPS management based on Windows® embedded service - USB interface. • MODBUS/JBUS RTU (RS232).Communication options• NET VISION: professional WEB/SNMP interface for UPS monitoring and shutdown management of several operating systems. • Dry-contact interface.